for a brighter future tomorrow
Air Source Heat Pumps
Intelligent Energy Solutions supply and install 2 types of heat pump
- Ground Source Heat Pumps
- Air Source Heat Pumps
Heat pumps take heat from one location, upgrade the heat and then use this to heat water. This can then provide a total heating solution throughout the year for both homes and commercial premises.
Ground source heat pumps often require large amount of ground and a significant capital investment on works. Air source heat pumps do not need this as they extract heat from the air rather than the ground.
Air source heat pumps can provide heat for the following:-
- Under floor Heating
- Standard Radiators
- Domestic Hot Water
- Skirting board radiators
This heating system usually consists of a heat exchanger on an outside wall. This outdoor unit looks much like a typical air conditioning system.
They can operate at more than 3 times the efficiency of conventional heating systems and as a result help to minimise Co2 emissions and reduce the heating costs of your property..
This type of pump works all year round even when the temperature outside is below freezing. The heat generated can also be used to heat your swimming pool.
Mitsubishi Ecodan Air Source Heat Pump
Intelligent Energy Solutions are registered Mitsubishi Ecodan Installers. The Mitsubishi Ecodan is regarded as one of the best air source heat pumps available on the market. The Ecodan offers the following benefits:-
- High efficiencies > 350%
- Low running costs
- No ground works required
- 30-50% reduction in Co2 emissions
- No gas supply or oil supply required
- Low starting currents (inverter controlled)
- Low maintenance
- Reduced VAT from 17.5% to 5% for domestic applications
- Low noise
- Reliable, proven technology
Click the link to download a zip file of the Ecodan brochure. Click here to view the ecodan brochure on-line.
Found the product? Now find the right installer...
When installing quality equipment, it is vital that the installer meets a similar standard. When Intelligent Energy Solutions install an Ecodan system we make sure that not only the system is installed to the highest standards but the complimentary equipment is also high quality and installed properly.
For instance, we normally install the system with a high performance un-vented copper cylinder (hot water storage tank). Un-vented copper cylinders give all the benefits of high pressure hot water with improved heating recovery times, improved anti-bacterial performance and reduced maintenance when compared to stainless steel storage cylinders.
We also use an advanced controller that not only controls the room temperature when the system is on but also controls the room temperature at night and modifies how early the system needs to turn on to reach your target temperature at different times of the year.
Intelligent Energy Solutions have two branches that cover the whole of England and Wales. These branches are based in Loughborough near Leicester in Leicestershire and in the Forest of Dean, Gloucestershire. This means that we are geographically close to Derbyshire, Nottinghamshire, Herefordshire and Worcestershire. Please feel free to give us a call to discuss your requirements.
For more information visit our news and information journal about ground source & air heat pumps.
You can also click the following link for the heat pump specific information in our overview brochure